manuals RSS

We provide direct links to the appropriate manuals on each of our product pages; in addition to this, below is the full list of our different manuals, each of which will mention (as thoroughly as possible) which of our designs apply to that manual. Baselit-4 User Manual Baselit-10 / Baselit-16 User Manual Baselit-16 (2-button controls) User Manual RGB-X User Manual SN-Pixel User Manual SN-Pixel (2-button controls) User Manual Xenopixel User Manual Proffie User Manual Proffie (2-button controls) User Manual GHv3 User Manual

Each of our lightsabers comes with a polycarbonate blade included, all of which have either 2mm or 3mm thick walls for heavy combat and a bullet tip. Also included are a USB power cord and an Allen wrench - no extra tools are necessary! There are small screws either in the bag with the Allen wrench or already set up in the screw holes near the blade emitter that are responsible for locking in the blade. Ensure they are loose enough to insert the blade fully (remove the outside plastic film and black safety plug first), then tighten a few rotations for...

The Knight of Ren Congratulations on being the proud owner of one of our unique Crossguard designs, The Knight of Ren lightsaber!   Assembly Each of our Knight of Ren lightsabers comes with 3 polycarbonate blades included, one which is 92cm long, has 2mm thick walls for heavy combat, a 1" diameter, and a bullet tip, and 2 smaller ones to create the unique Crossguard. It also comes with the main hilt piece and 3 smaller hilt pieces for the 3 blade emitters (see images below for reference):    The hilt pieces do not require tools and simply thread into place until tight. Also included with...

The Guardian Congratulations on being the proud owner of one of our flagship RGB Baselit Guardian lightsabers!    The Guardian lightsaber comes in 3 different hilt colors: Black, Grey, and Silver. Each one operates the same and has the same features, usage instructions, and warnings.   For help assembling your lightsaber, view our Assembling The Saber article. Turning on/off To turn on, quick press the power button. To turn off, long press for 3-4 seconds until it powers down. Sword Fighting Mode After turning on, press and hold the power button for 1 second (until it flashes once), then release and immediately quick press to...