GHv3 User Manual

Are you in the right place?

If you're here, we're assuming you want to operate one of the following sabers:

The Acolyte (GHv3 model)
The Ghost (GHv3 model)
The Hellfire Scorpion (Mortal Kombat) (GHv3 model)
The Korriban Collection (GHv3 model)
The Ranger (GHv3 model)
The Sorcerer (GHv3 model)
The Summoner (GHv3 model)

If you are unsure of whether this is the correct manual for you, you can always visit the product page of the lightsaber you purchased from us, and the web page will mention relevant manuals for applicable models. You can also contact us via chat, email us at contact@deluxesabers.com, or DM us on Instagram @deluxesabers.

Here is a full GHv3 manual from SaberTec if you want to dive deep into GHv3, but if not, then we have a quick guide below for more common needs.

GHv3 Quick Guide

FUNCTION	TRIGGERING WITH ONE MOMENTARY SWITCH
Power On Enter Effect Menu	Tap the button Hold the button, then hold it again. Point the saber upwards while doing this.
∟ Change Blade Profile*	∟ Slowly twist the saber
∟ Change On Top Effect*	∟ Tap the button
∟ Save And Leave	Hold the button until the confirmation sound is played
Enter Accent Menu	Hold the button, then hold it again. Point the saber downwards while doing this.
∟ Change Standby Accent Profile*	∟ Tap the button
∟ Enter Ignited Accent Submenu	∟ Hold the button for 1 s
∟ Change Ignited Accent Profile*	∟ Tap the button
∟ Save And Leave	Hold the button until the confirmation sound is played
Enter Color Change Menu	Hold the button, then tap it. Point the saber upwards while doing this.
∟ Cycle Through Preset Color Profiles	∟ Slowly twist the saber
∟ Save And Leave	Hold the button
Enter Lockup Mode	Hold the button, release it and then twist the saber. Point the saber upwards while doing this.
∟ Leave Lockup Mode	Tap the button
Enter Drag Mode	Hold the button, release it and then twist the saber. Point the saber downwards while doing this.
∟ Leave Drag Mode	Tap the button
Enter Melt Mode	Hold the power button, release it and then perform a stab
∟ Leave Melt Mode	Tap the power button
Blaster Block	Tap the button
Force Push	Hold the button while swinging the saber
Activate Power Saving	Hold the power button while performing a stab
Deactivate Power Saving	Hold the power button while performing a stab
Power Off	Hold the power button until the saber shuts down
Enter Sound Font Menu	Hold the button before the blade is ignited, then release it. Point the saber upwards while doing this.
∟ Go To Next Sound Font*	∟ Slowly twist the saber
∟ Jump 10 Sound Fonts Further*	∟ Tap the button
∟ Save And Leave Sound Font	Hold the button
Menu
Show Battery Indicator	Hold the power button while performing a stab before the saber is ignited
∟ Calibrate Battery	∟ When your battery is fully charged, perform a stab while battery level is displayed
Enter Volume Control	Hold the button before the blade is ignited, then release it. Point the saber downwards while doing this.
∟ Adjust Volume	∟ Slowly twist the saber
∟ Save And Leave Volume Control	Tap the power button
Start Background Music	Hold the button while twisting the saber before the saber is ignited. Point the saber upwards while doing this.
∟ Skip Track	∟ Quickly twist the saber
∟ Stop Background Music	Hold the button while twisting the saber before the saber is ignited
Enter Saber Editor	Hold the button while twisting the saber before the saber is ignited. Point the saber downwards while doing this.
∟ Select Editor Mode	∟ Tap the button
∟ Color Profile
∟ Select Color Profile	∟ Slowly twist the saber
∟ Edit Color	∟ Slowly twist the saber
∟ Go To Next Saber State	∟ Tap the button
∟ Revert Colors To Default	∟ Perform a stab
∟ Save Color Profile	∟ Hold the button
∟ Confirm Selection	∟ Tap the button
∟ Save and Leave Editor Mode	∟ Hold the button
∟ Pixel Number	∟ Slowly twist the saber
∟ Edit Pixel Number
∟ Save and Leave Editor Mode	∟ Hold the button
∟ Ignition Speed
∟ Select Sound Font	∟ Slowly twist the saber
∟ Edit Ignition Speed	∟ Slowly twist the saber
∟ Save Ignition Speed	∟ Hold the button
∟ Confirm Selection	∟ Tap the button
∟ Save and Leave Editor Mode	∟ Hold the button
∟ Retraction Speed
∟ Select Sound Font	∟ Slowly twist the saber
∟ Edit Retraction Speed	∟ Slowly twist the saber
∟ Save Retraction Speed	∟ Hold the button
∟ Confirm Selection	∟ Tap the button
∟ Save and Leave Editor Mode	∟ Hold the button
∟ Battle configuration
∟ Blaster Block Mode
∟ Button and Swinging	∟ Slowly twist the saber clockwise
∟ Button	∟ Slowly twist the saber counterclockwise
∟ Force Push Mode
∟ Button and Swinging	∟ Slowly twist the saber clockwise
∟ Button	∟ Slowly twist the saber counterclockwise
∟ Lockup Mode
∟ Button and Clashing	∟ Slowly twist the saber clockwise
∟ Button	∟ Slowly twist the saber counterclockwise
∟ Save and Leave Editor Mode	∟ Hold the button
∟ Gesture Controls
∟ Stab Ignition
∟ Turn stab ignition on	∟ Slowly twist the saber clockwise
∟ Turn stab ignition off	∟ Slowly twist the saber counterclockwise
∟ Swing ignition
∟ Turn swing ignition on	∟ Slowly twist the saber clockwise
∟ Turn swing ignition off	∟ Slowly twist the saber counterclockwise
∟ Twist Ignition
∟ Turn twist ignition on	∟ Slowly twist the saber clockwise
∟ Turn twist ignition off	∟ Slowly twist the saber counterclockwise
∟ Twist Retraction
∟ Turn twist retraction on	∟ Slowly twist the saber clockwise
∟ Turn twist retraction off	∟ Slowly twist the saber counterclockwise
∟ Save and Leave Editor Mode	∟ Hold the button
∟ Effect Font Slot
∟ Select effect font slot	∟ Slowly twist the saber
∟ Save and Leave Editor Mode	∟ Hold the button
∟ Save And Leave Saber Editor
∟ Confirm Selection	∟ Hold the button
Wake Up From Deep Sleep	Tap the button
Reset	Hold the button for 10 s

* When changing the On Top Effect, Background Effect or Sound Font, you can go to the next one by pointing your saber upwards during selection or to the previous one by pointing your saber downwards.

Charging

When the battery runs low, a voice will sound to inform you the battery is low. Insert the charging cable in the DC port. The hilt will have a "pulsing" light indicating that it is charging. Once it is fully charged, the light will either turn off or remain lit and steady to indicate a full charge.

Symptoms of low battery

If you haven't charged it recently, the saber may flash on clash with a red tinge; if you don't notice this or ignore it long enough, the saber will turn off automatically and no longer be powered on OR in wake mode until recharged.